Thursday, December 13, 2012

Art Deco and Bent

At the end of my last post you can see the hot pipe bending set up I built.  My buddy, Ken, gave me some bed rails someone was getting rid of off a waterbed.  They're 1 inch plywood and are perfect for an application like this.  I built the bending rig for some upcoming light fixtures I'm planning on making for the house.  Two of the fixtures definitely will have curves.  I'm hoping to use some of my old growth Fir to make all these.  

Before I tackle a specific project I wanted to get some practice in.  I don't like to be too wasteful, so didn't want to bend just to bend.  So, I decided to see how many Christmas presents I could get out of the experience.  Ken had taken down a Russian Olive tree and noticed the ends of the logs were a deep chocolate color, so he dropped a couple firewood size logs off for me to cut up.  It's actually quite pretty.  It seems to continually darken, but is nowhere near as dark as the ends of the log were.

I quarter sawed the log to yield around 13 slats approximately 3/16th inch at the bandsaw.  I currently am running a 3/4" Laguna Resaw King on the saw.  It produced really nice resawn boards.  After cutting out a basic design from heavy craft paper, I transferred that to all the boards and started the rough shaping, again, at the bandsaw.  This time I switched to a 1/8 inch Timberwolf and changed out my regular Carter blade guides to the Carter guide for curve cutting.  It works really well and allows you to really ride the back of the blade when cutting a curve.  After soaking overnight, which I don't think is necessary, I started bending.  

I had a pattern on a piece of plywood I was trying to match.  I wasn't clamping any of the bends to help retain that specific shape, but I was trying to approximate it as close as possible by over bending to account for spring back.  I then let them dry completely.  Because of that, none of my spoons or "salad tongs" are exactly the same.  Each was finished shaped on the Rigid oscillating drum and spindle sander.  I had several of the original slats that weren't large enough for the pattern and a few more that I bent too fast or too much and split.  

Here is an example of a set.  

While I was waiting for the spoons to dry I also started up a project for my wife, Sylvia.  We have been using a Senseo coffee machine for a couple of years.  Unfortunately in the United States, Senseo has been eclipsed by the Kuerig.  It's the whole Beta-Max / VHS thing from my childhood.  Beta-Max was a superior platform, but VHS caught on first.  I personally don't like the Kuerig, because of all the plastic that ends up in land fills.  Also, it's not nearly as good a cup of coffee as the Senseo.  Anyway, to the point, we bought a little "5" cup (two of ours) cone style coffee maker.  Not as good a cup of coffee, but I'm not willing to deal with a plunger pot each day.  The following show the project from rough sketch to some full scale drawing to the finished piece.  
My tablesaw sled and the Grrripper push block were invaluable in cutting the little parts.  The faces are rabbited at angles to accept the end pieces.  Figuring out the compound angles was a challenge.  I don't have a trig calculator anymore.  I managed to find this site for a behind-the-scenes math solution.  
Although I can't say I'm a fan completely of every genre, I do like more elements of specific genres, Art Deco being one.  
I'm still debating adding little birch feet. 

4 comments:

wvwoodshed said...

Great update. Not a coffee fan personally, but really like the holder. Always a great read at Tumblewood. Thanks and Happy Holidays!!!

Rob Bois said...

For the record, the Cuisinart K-cup machine comes with a reusable pod and filter so you can brew single cups at a time using your own grounds. Oh, and nice projects!

David Harms said...

Nicely done, Vic. Love the filter holder.

Vic Hubbard said...

Thanks, WV!

Rob - We'll see how long we stay with a small coffee pot. I'd love an all auto espresso/coffee machine, but...I'd like tools more.

Appreciated, David.